WebRTC vs SIP: What’s the Difference and Why It Matters
If you have set up a VoIP system or looked at browser calling, you will have come across WebRTC and SIP. Both are used for voice and video over the internet, but they are not alternatives in the way they are often presented. SIP is a signalling protocol; WebRTC is a media technology built into browsers. Knowing what each one does makes it much easier to plan a phone system that includes browser calling.
What is SIP?
The Session Initiation Protocol (SIP) is a signalling protocol: it sets up, changes and ends calls. It was first standardised in 1999 and the current core specification, RFC 3261, dates from 2002. SIP is how desk phones, softphones, PBXs and SIP trunks talk to each other.
- It is widely supported across phones, PBXs and carriers.
- It handles registration, call setup, transfers, hold and hang-up.
- It does not carry the audio itself. The media is described with SDP and sent separately, usually as RTP or encrypted SRTP.
What is WebRTC?
WebRTC (Web Real-Time Communication) is a set of browser APIs and protocols, standardised by the W3C and the IETF, that lets a web page capture audio and video and send it in real time without plugins. It is built into Chrome, Edge, Firefox and Safari.
- It includes NAT traversal (ICE, with STUN and TURN servers).
- Media is always encrypted with DTLS-SRTP.
- It supports audio, video and data channels.
- It deliberately does not define signalling: each application chooses how to exchange call set-up information.
You can read more at webrtc.org.
The key differences
- What it does: SIP is call signalling and control. WebRTC is the media engine (capture, codecs, encryption and transport), plus the browser APIs to use it.
- Signalling: SIP is a signalling protocol. WebRTC has none of its own; many applications use SIP over a WebSocket for it, others use their own messages.
- Infrastructure: SIP phones register to a PBX or a SIP proxy such as Kamailio. WebRTC needs a web page, a signalling server, and usually STUN and TURN servers.
- Security: in SIP, encryption (TLS for signalling, SRTP for media) is optional and depends on the setup. In WebRTC, media encryption is mandatory.
- Where it fits: SIP connects phones, PBXs and carriers. WebRTC brings calling into browsers and web applications.
Do they compete or complement each other?
They complement each other. The most common business setup uses both: a browser softphone uses WebRTC for the audio and sends SIP over a secure WebSocket to the PBX. Asterisk supports this natively, as the Asterisk documentation shows, and FreeSWITCH, Kamailio and OpenSIPS do as well. Siperb’s knowledge base has a guide to FreeSWITCH WebRTC. For the full call flow, see how WebRTC works with SIP.
Why businesses should care
- Browser calling on the existing phone system: WebRTC lets staff use their PBX extension from a browser, without replacing the PBX.
- SIP is not going away: phones, PBXs and SIP trunks will keep using it, and WebRTC calling to the phone network still ends up as SIP somewhere along the way.
- Flexibility: a PBX that supports both can serve desk phones, mobile apps and browser users side by side.
Conclusion
SIP and WebRTC solve different problems. SIP sets up and controls calls across the phone network; WebRTC carries secure, real-time media in the browser. For most businesses the question is not which one to choose, but how to connect browser users to the SIP system they already have. For a more forward-looking view of the same comparison, see WebRTC vs SIP: understanding the future of internet calling.
Updated 12 November 2026: clarified that WebRTC defines no signalling of its own, corrected the security and infrastructure comparisons, and fixed the FreeSWITCH and Kamailio links.